Plastic Honey Gate

Use these honey gates to make your own honey tank. When you install a honey gate on your own pail, use a hole saw.

IMPORTANT: You MUST USE ONLY food-approved, white plastic tanks when making your own honey tank.

For a 1-1/4 inch gate use 1-5/8 inch hole saw, for 1-1/2 inch gate use 2 inch hole saw and for a 2 inch gate use 2-3/8 inch hole saw.

1-1/4" Specifications

• Inside diameter: 1-1/4"
• Outside diameter of threads: approx. 1-5/8"
• Hole size to drill: 1-5/8"
• Nominal thread size: NPS 1-1/4
• O-ring size: ORING1 1.96" OD x 1.72" ID x 1/8"
• Gasket size for thread seal: GASKET1 1-3/8" ID

1-1/2" Specifications

• Inside diameter: 1-1/2"
• Outside diameter of threads: approx. 1-13/16"
• Hole size to drill: 1-7/8" or 2"
• Nominal thread size: NPS 1-1/2
• O-ring size: ORING2 2.11" OD x 1.9" ID x 1/8"
• Gasket size for thread seal: GASKET2 1-3/4" ID

2" Specifications

• Inside diameter: 2"
• Outside diameter of threads: approx. 2-1/4"
• Hole size to drill: 2-3/8"
• Nominal thread size: NPS 2
• O-ring size: ORING3 2.63" OD by 2.3" ID x 0.016"
• Gasket size for thread seal: GASKET3 2-1/4" ID

Check out this video for tips on using a plastic honey gate to bottle honey: https://www.youtube.com/watch?v=Bt4AN_nwu9Y