Lyson Honey Pump 370W 230V
This is the 230 volt AC version of LYHPW2021GNF honey pump.
A 370 Watt motor powers this Lyson honey pump. Most often used to pump honey from a clarifying tank to bottling tanks during extraction, but can be used for any task requiring honey to move from one place to another. Has the capacity to pump up to 240 gallons per hour with a variable speed inverter controlled motor, and can also be reversed.
This pump also has a start/stop function that works with a switch (float/level) to control the honey level in a tank or sump. Any switch that closes (provides continuity) when the pump needs to run and opens when the pump needs to stop will work. The pump comes with a connector jumper to allow the pump to run in manual speed control (forward or reverse).
Click here for a spare connector that can be used with your switch to automate the pump. You can then save the original jumper connector for manual operation or troubleshooting.
Product Specifications:
- Power Supply: 240V AC, 2 amp consumption
- 1.5" sanitary inlet connection
- 1.5" sanitary outlet connection
- Run switch jumper connector included
- Two 1.5" sanitary to barbed fittings included
- Two 1.5" sanitary gaskets included
- Two 1.5" tri clamp fittings included
- Two 1.5" hose clamps included
- Hose (1.5" or 40mm) not included
- Four casters (two lockable) with handle included
This is the 230 volt AC version of LYHPW2021GNF honey pump.
A 370 Watt motor powers this Lyson honey pump. Most often used to pump honey from a clarifying tank to bottling tanks during extraction, but can be used for any task requiring honey to move from one place to another. Has the capacity to pump up to 240 gallons per hour with a variable speed inverter controlled motor, and can also be reversed.
This pump also has a start/stop function that works with a switch (float/level) to control the honey level in a tank or sump. Any switch that closes (provides continuity) when the pump needs to run and opens when the pump needs to stop will work. The pump comes with a connector jumper to allow the pump to run in manual speed control (forward or reverse).
Click here for a spare connector that can be used with your switch to automate the pump. You can then save the original jumper connector for manual operation or troubleshooting.
Product Specifications:
- Power Supply: 240V AC, 2 amp consumption
- 1.5" sanitary inlet connection
- 1.5" sanitary outlet connection
- Run switch jumper connector included
- Two 1.5" sanitary to barbed fittings included
- Two 1.5" sanitary gaskets included
- Two 1.5" tri clamp fittings included
- Two 1.5" hose clamps included
- Hose (1.5" or 40mm) not included
- Four casters (two lockable) with handle included